Please note, All Swap Meet Sales "AS-IS" and "FINAL"
0-90ohm Gas Tank Sending Unit (GM 1965 and later, Dolphin)
This gas tank sender mounts with five mounting screws.
It works on gas tanks from 6 to 24 inches deep by cutting to length using the instructions included.
Since fuel tank senders only read resistance to ground they work on all 6-24 volt systems positive or negative ground.
It does not have a fuel pickup tube built into them as some original senders may have.
Made with a high quality ceramic board rheostat.
Match your fuel sender choice with your fuel guage and the OHMs of resistance at EMPTY (0 Ohm) and FULL (90 Ohms)